Login Register
 
Home Accepted Papers
Subjects
# Paper ID Paper Title Authors Status
1 2523-UFGNSM13-FULL (R1) AC electrodeposition of Ni-Mn alloy nanowires in AAO template keyvan maleki, keyvan maleki, zahra alemipour Paper Accepted (Oral Presentation)
2 2522-UFGNSM13-FULL (R2) A new phosphazene nanoparticles: synthesis and characterization Hourieh Sadat Mirhosseini Mousavi Paper Accepted (Poster Presentation)
3 2415-UFGNSM13-FULL An investigation of solvent effect on rhombohedral/monoclinic/tetragonal phase properties of Pb(Zr0.53Ti0.47)O3 nanoparticles prepared via sol-gel method Hossein Abdizadeh, Mohammad Reza Golobostanfard Paper Accepted (Poster Presentation)
4 2113-UFGNSM13-FULL (R1) An Investigation on the Effect of the Catalyst on Physical Properties of Silicon Oxide Nanostructures Prepared by CVD Technique narges heidaryan Paper Accepted (Poster Presentation)
5 2540-UFGNSM13-FULL (R2) Antibacterial and self cleaning properties of TaN-Ag nanocomposite thin film and its application in surgical instrument tahereh ghanbaryrad, mahdi sadry, parvaneh sangpour, majid borghei Paper Accepted (Poster Presentation)
6 2549-UFGNSM13-FULL Application of Nano Silica in Concrete for Enhanced Resistance against Sulfate Attack Arash Khosravi Paper Accepted (Oral Presentation)
7 2516-UFGNSM13-FULL Assessing the protective performance of nanoclay incorporated silane coating on steel Najmeh Asadi, Mohsen Saremi Paper Accepted (Poster Presentation)
8 1028-UFGNSM13-FULL (R1) A Study on Electrospun Nanofibrous Mats for Local Antibiotic Delivery Mahboubeh Maleki, Mohammad Amani-Tehran, Masoud Latifi, Sanjay Mathur Paper Accepted (Oral Presentation)
9 2555-UFGNSM13-FULL AZ31/AlN nano-composite surface layers fabricated by friction-stir processing Sara Bourbour Shirazi, Seyed Farshid Kashani-Bozorg Paper Accepted (Poster Presentation)
10 2524-UFGNSM13-FULL (R1) CHARACTERIZATION AND MECHANICAL PROPERTIES OF PM Fe-Cu/SiCp ALLOYS kerim emre öksüz, tarık gün Paper Accepted (Poster Presentation)
11 2486-UFGNSM13-FULL (R1) Characterization of CIGS thin films fabricated from nanoparticles under selenization process Rasoul Malekfar Paper Accepted (Poster Presentation)
12 2186-UFGNSM13-FULL (R10) Characterization of Nano-structured Tin Oxide Film Prepared by Anodic Oxidation Process Paper Accepted (Poster Presentation)
13 2064-UFGNSM13-FULL (R1) Characterization of Ni-CNTs Nanocomposites Produced by Mechanical Alloying Shaghayegh Gharegozloo, abolghasem ataie, Hossein Abdizadeh Paper Accepted (Poster Presentation)
14 2277-UFGNSM13-FULL Chitosan and Poly (ethylene glycol) Coated Magnetic Iron Oxide Nanoparticles as a New Smart Drug Carrier for Controlled Drug Release Alireza Kavand, Ali yasbolaghi Paper Accepted (Poster Presentation)
15 2520-UFGNSM13-FULL Comparing Two Different Extrusion Temperatures and the Resulted ‎Fine Grain Microstructures of Al7075‎ Masood Rezaii, Seyed Mohammad Hasan Pishbin Paper Accepted (Poster Presentation)
16 2232-UFGNSM13-FULL (R1) Controlled growth of well-aligned carbon nanotubes, electrochemical modification and improving with electrodeposited less-common gold nanostructures Paper Accepted (Poster Presentation)
17 2420-UFGNSM13-FULL (R1) Copper Ion Selective Adsorption Using Functionalized Nanostructured Silica toward Environmental Monitoring in the Aquatic Ecosystems Habibollah Younesi Paper Accepted (Poster Presentation)
18 2085-UFGNSM13-FULL (R1) Deposition of polyaniline/silica nanocomposite coating on stainless steel; study of its corrosion properties mohamad fatahi amirdehi, darush afzali Paper Accepted (Poster Presentation)
19 2467-UFGNSM13-FULL (R2) Dispersion of Multi Walled Carbon Nanotubes within 3 mol. % Yttria Stabilized Zirconia Based Ceramics: A Comparative Study of Methods Paper Accepted (Poster Presentation)
20 2349-UFGNSM13-FULL Dye Sensitized Solar Cell Based on Hierarchical Porous Titania Photoanode Prepared by Controlled Phase Separation Paper Accepted (Oral Presentation)
21 2376-UFGNSM13-FULL (R1) Dynamical Mechanical Thermal analysis (DMTA) and Electrical Conductivity of Nano Composites Based on EVA /Expanded Graphite with Different Graphite Aspect Ratio Hamid Garmabi, mina mahdavi Paper Accepted (Poster Presentation)
22 2300-UFGNSM13-FULL Effect of Al2O3 Nano particles on Microstructure and tensile strength of dissimilar friction stir welded Nanocomposite joint in AA7075 and AA5083 aluminum alloys Paper Accepted (Poster Presentation)
23 2455-UFGNSM13-FULL (R1) Effect of barrier layer on fabrication of FePt nanowires by electrodeposition into nanoporous alumina templates Farzad Nasirpouri Paper Accepted (Poster Presentation)
24 2395-UFGNSM13-FULL Effect of CaCO3 Nano Particles on Dry Film Properties of White Traffic ‎Paint ghola mreza karimi Paper Accepted (Poster Presentation)
25 2111-UFGNSM13-FULL (R2) Effect of Carboxylate Ferroxane Nanoparticles Functionality on Lead Removal Efficiency rozita m moatari, Safoora Rahimi, Laleh Rajabi, Ali Ashraf Derakhshan, Mohammead keyhani Paper Accepted (Poster Presentation)
26 2180-UFGNSM13-FULL Effect of chemical precipitation parameters on the synthesis of Ta doped SnO2 using design of experiment Samaneh Gashtiazar, Fereshteh Rashchi, Rasoul Khayyam Nekouei Paper Accepted (Poster Presentation)
27 2288-UFGNSM13-FULL (R1) Effect of combining Cr2O3 nano-particles and welding input parameters on the heat affected zone width in submerged arc welding process Paper Accepted (Oral Presentation)
28 2327-UFGNSM13-FULL Effect of electrochemical parameters on the brass anodization ‎process in NaOH alkaline media Paper Accepted (Poster Presentation)
29 2219-UFGNSM13-FULL Effect of equal channel angular pressing on the microstructure and mechanical properties of AISI type 304 austenitic stainless steel Paper Accepted (Poster Presentation)
30 2192-UFGNSM13-FULL Effect of fluoride concentration and water content on morphology of titania nanotubes in ethylene glycol solution Paper Accepted (Poster Presentation)
31 2460-UFGNSM13-FULL (R1) Effect of Mn Dopant on Lattice Parameters and Band Gap Energy of Semiconductor ZnO Nanoparticles Mahshid Chireh Paper Accepted (Oral Presentation)
32 2045-UFGNSM13-FULL Effect of nanoclay on the morphology stability of polymer modified bitumen Akram Tavakoli, Arezoo Ghaempour, Mir Karim Razavi Aghjeh Paper Accepted (Poster Presentation)
33 2168-UFGNSM13-FULL (R1) Effect of Nano-Silica Particles on the Mechanical Properties of PP/GF Knitted Composites Fatemeh Nasiri, Hossein Hasani Paper Accepted (Poster Presentation)
34 2152-UFGNSM13-FULL Effect of nitrogen doping on the phase evolution of the TiO2 nanoparticles Mohammad Derakhshani, Hossein Abdizadeh, Mohammad Reza Golobostanfard Paper Accepted (Poster Presentation)
35 2530-UFGNSM13-FULL (R1) Effect of powder particle size and substrate hardening on the formation of nanostructured TiC coating on AISI-D2 steel by mechanical milling Farhad Saba, Shahram Raygan, hossein Abdizadeh Paper Accepted (Oral Presentation)
36 2221-UFGNSM13-FULL (R1) Effect of rubber modification on the morphology and properties of Novolac nanostructures Paper Accepted (Poster Presentation)
37 2428-UFGNSM13-FULL (R1) Effect of synthesis temperature on structural and magnetic properties of Y-type Sr-hexaferrite nanoparticles Alireza Nikzad, Ali Ghasemi, Gholam reza gordani Paper Accepted (Poster Presentation)
38 2260-UFGNSM13-FULL Effects of anodic oxidation in ethylene glycol based electrolyte on the corrosion resistance and biocompatibility of NiTi shape memory alloy majid mollavali Paper Accepted (Poster Presentation)
39 2418-UFGNSM13-FULL Effects of Nb addition on nano-crystalline NiTi intermetallic compound produced by mechanical alloying Seyed Farshid Kashani-Bozorg, Masoud Nazarian Paper Accepted (Poster Presentation)
40 2248-UFGNSM13-FULL Efficient and highly selective aqueous oxidation of alcohols catalyzed by copper (II) phthalocyanine nanoparicles Paper Accepted (Poster Presentation)
41 2051-UFGNSM13-FULL (R2) Electrical and mechanical properties of Cu matrix nanocomposites reinforced with yttria-stabilized zirconia particles fabricated by powder metallurgy Mahmood Khaloobagheri, Behzad Janipour, Nayereh Askari Paper Accepted (Poster Presentation)
42 2216-UFGNSM13-FULL Electrochemical behavior of S-doped nanostructured TiO2 layer synthesized with PEO process for photocatalytic applications Paper Accepted (Poster Presentation)
43 2105-UFGNSM13-FULL (R1) Electrodeposition of gold and Polypyrrole thin films for neural microelectrodes Sohrab Sanjabi, Zohreh Deljoo Kojabad Paper Accepted (Oral Presentation)
44 2212-UFGNSM13-FULL Electrophoretic deposition of titania thin films: influence of deposition time on microstructural and optical properties of the coatings Paper Accepted (Poster Presentation)
45 2297-UFGNSM13-FULL Electrospun Sodium Alginate/Polyvinyl alcohol Nanofibrous scaffold: An Attempt to Increase Final Sodium Alginate Mass Ratio Paper Accepted (Poster Presentation)
46 2531-UFGNSM13-FULL (R1) Emulsion technique to synthesize polystyrene incorporated with surface modified and unmodified nano-TiO2 particles mahdi mirzababaei, Hossein Behniafar, hamid hashemimoghadam Paper Accepted (Poster Presentation)
47 2546-UFGNSM13-FULL Encapsulation of Polystyrenic Nanocapsules Containing Reactive Amine with Potential Application in Self-healing Composites Seyed Hossein Payandeh Gharib Doost, Sepideh Khoee Paper Accepted (Poster Presentation)
48 2551-UFGNSM13-FULL Enhanced gas permeability by fabricating mixed matrix membranes of zeolite 4A nanoparticles and poly(dimethyl siloxane) Mashallah Rezakazemi Paper Accepted (Poster Presentation)
49 2408-UFGNSM13-FULL (R1) Enhancement magnetical properties of Fe3O4@Ag by reduction variation Paper Accepted (Poster Presentation)
50 2354-UFGNSM13-FULL (R1) Evaluating the Effects of Different Plasticizers on Mechanical Properties of Starch/ Clay Nanocomposites Paper Accepted (Poster Presentation)
51 2116-UFGNSM13-FULL Experimental manipulation of gold nano-particles by Atomic Force Microscope and investigating effect of various working parameters Seyed Abbas Shahmoradi Zavareh, Hamid Akbari Moayyer, Mohammad Amin Ahouei Paper Accepted (Poster Presentation)
52 2144-UFGNSM13-FULL (R2) Extra-cellular synthesis of silver nanoparticles using leaves of Nigella sativa Morteza AZizi Paper Accepted (Poster Presentation)
53 2265-UFGNSM13-FULL (R1) Fabrication of AAO via Electrodeposited Aluminum from RTIL Paper Accepted (Poster Presentation)
54 2306-UFGNSM13-FULL Fabrication of CoFe/BaFe12O19 magnetic nanocomposite thin films by electrodeposition Paper Accepted (Poster Presentation)
55 2487-UFGNSM13-FULL (R1) Fabrication of Collagen–Chitosan nanofibrous scaffold with honey underlayer for skin tissue engineering Saeids Nouri Khorasani Paper Accepted (Poster Presentation)
56 2145-UFGNSM13-FULL (R1) Fabrication of nano bioglass/polymer composite by gel casting method amirhosein banaei, mohammad saeri, ali doostmohammadi, farhang tirgir Paper Accepted (Poster Presentation)
57 2042-UFGNSM13-FULL Fabrication of nano silver/polyethylene packaging films with controlled release of silver ion Niloofar Bayani Bandpey, Abdolreza Aroujalian, Ahmadreza raisi, Shahrzad Fazel Paper Accepted (Poster Presentation)
58 2329-UFGNSM13-FULL (R1) Fabrication of Nano Structure Ferrite Foam Paper Accepted (Poster Presentation)
59 2440-UFGNSM13-FULL (R1) Fabrication of Polyaniline Hollow Micro/Nanostructures with Controlled Morphology mohammad ghorbani Paper Accepted (Poster Presentation)
60 2390-UFGNSM13-FULL Fatigue behavior of Aluminum composite reinforced by Aluminum nitride nanoparticles Sayyed Ahmad Jenabali Jahromi Paper Accepted (Poster Presentation)
61 2076-UFGNSM13-FULL (R1) Free volume study of severely plastic deformed pure Fe Nazanin Forouzanmehr, Mahmoud Nili-Ahmadabadi Paper Accepted (Oral Presentation)
62 2505-UFGNSM13-FULL (R1) Frequency Analysis of Nano Sandwich Structure with Nonlocal Effect Paper Accepted (Poster Presentation)
63 2333-UFGNSM13-FULL (R1) Gasochromic WO3 nanoparticles in liquid prepared by a simple anodizing method Paper Accepted (Poster Presentation)
64 2541-UFGNSM13-FULL (R1) Gelatin/Poly (acrylamide) IPN’s Film: Structure-Property Relationship Study bita mohammadi, Hossein Mahdavi Paper Accepted (Poster Presentation)
65 2476-UFGNSM13-FULL (R1) Graphene/polyaniline core-shell nanolayers prepared by in situ inverse microemulsion zahra kachoei, Sepideh Khoee, Naser Sharifi sanjani Paper Accepted (Poster Presentation)
66 2079-UFGNSM13-FULL Growth and investigation on potassium nickel sulfate crystal grown from ‎aqueous solution nahid khayat, Hamid Rezagholipour Dizaji Paper Accepted (Poster Presentation)
67 2259-UFGNSM13-FULL Growth Icosahedral Boron Carbide Nanocrystals in DLC Tissue by HFCVD Bahrama Mahdavipour, mohammadreza hantehzadeh Paper Accepted (Poster Presentation)
68 2490-UFGNSM13-FULL (R1) Hot Deformation Behavior of Ultra-fine Grained Pure Ti SEYEDVAHID SAJJADIFAR Paper Accepted (Oral Presentation)
69 2515-UFGNSM13-FULL (R1) Hybrid bio-nanocomposite of polyvinyl alcohol/Starch nanocrystals/nanoclay: preparation and structure-properties relationship study Kimia Nankali, Hossein Mahdavi, Alireza shakeri Paper Accepted (Poster Presentation)
70 2228-UFGNSM13-FULL (R1) Hydrogen desorption properties of mechanically alloyed MgH2-9 wt % V-1 wt% Al nanocomposite Paper Accepted (Poster Presentation)
71 2545-UFGNSM13-FULL (R1) Hydrothermal Synthesis of Nanostructured Catalysts in the Presence of Novel Chiral Ionic Liquid and Photodegradation of Air Pollutants Behrouz Bazri, Elaheh Kowsari Paper Accepted (Poster Presentation)
72 2209-UFGNSM13-FULL Improvement of flame retardant of PE/EVA using nano-sized magnesium hydroxide Paper Accepted (Poster Presentation)
73 2224-UFGNSM13-FULL (R1) Influence of Nano Al2O3/SiO2 reinforcement on mechanical Properties of 319 aluminum alloy Paper Accepted (Poster Presentation)
74 2104-UFGNSM13-FULL Influence of Various Conditions on Lepidocrocite Nanoparticles Morphology Safoora Rahimi, rozita m moatari, Laleh Rajabi, Ali Ashraf Derakhshan Paper Accepted (Poster Presentation)
75 1013-UFGNSM13-FULL (R1) Influences of Nano-Chitosan Treatment on Physical, Mechanical Properties Wood Zahra Nowrouzi, Behbood MOhebby, Habibollah Unesi Paper Accepted (Poster Presentation)
76 2203-UFGNSM13-FULL (R1) In situ synthesis and characterization of silver nanoparticles embedded in chitosan/polyvinyl alcohol hydrogel by gamma irradiation Nahid Hemmati Nejad, Azadeh Bashari Paper Accepted (Poster Presentation)
77 2211-UFGNSM13-FULL (R2) Introducing Biofunctional groups on the surface of carbon nanotube to make an efficient biocompatible vector Paper Accepted (Poster Presentation)
78 2094-UFGNSM13-FULL Investigating on the reverse transformation of martensite to austenite and Pseudoelastic behavior in Ultrafine-Grained Fe-10Ni-7Mn (wt %) Steel processed by heavy cold rolling hamidreza koohdar, Mahmoud Nili-Ahmadabadi, محمد حبیبی پارسا, hadi ghasemi-nanesa Paper Accepted (Oral Presentation)
79 2436-UFGNSM13-FULL Investigation of hydrogen storage properties of Pd/MWNTs Paper Accepted (Poster Presentation)
80 2120-UFGNSM13-FULL (R1) Investigation of Nonlinear Tensile Behavior of Defective Carbon Nanotubes Using a Modified Molecular Structural Mechanics Model Seyed Hadi Ghaderi Paper Accepted (Oral Presentation)
81 2528-UFGNSM13-FULL (R1) Investigation of prepared nanostructure transparent oxyfluoride glass ceramic and Effects of Al2O3 on trapping fluorine and microstructure elham samadbin, Reza Poursalehi, parvin alizadeh, Azam samadbin Paper Accepted (Poster Presentation)
82 2242-UFGNSM13-FULL (R1) Investigation of the efficiency of immobilized titanium dioxide nanoparticles in the photocatalytic removal of metronidazole as a model contaminant from antibiotic compounds Paper Accepted (Poster Presentation)
83 2502-UFGNSM13-FULL (R1) Investigation on phase evolution in mechanically alloyed nano-structured Fe-Si system abolghasem ataie, Hossein Abdizadeh Paper Accepted (Poster Presentation)
84 2371-UFGNSM13-FULL (R2) Invetigation on the bioactivity of Calcium Aluminate Cement in the presence of Nanosilica sasan otroj Paper Accepted (Poster Presentation)
85 2414-UFGNSM13-FULL (R1) Low Temperature Synthesis of Barium Titanate Powder by a Modified Sol-Gel Method Hossein Abdizadeh, Mohammad Reza Golobostanfard Paper Accepted (Poster Presentation)
86 2125-UFGNSM13-FULL (R1) Low Temperature Synthesis of ZnWO4 Nano Powders Using LiNO3-KNO3 Medium zahra amoozegar, rahim naghizadeh, Hamid Reza Rezaie Paper Accepted (Poster Presentation)
87 2033-UFGNSM13-FULL (R1) Manipulating the structure and morphology of Cobalt-Boron nano-particles through a chemical approach Hooman Sabarou, abolghasem ataie Paper Accepted (Poster Presentation)
88 2532-UFGNSM13-FULL (R1) Mechanical, morphological properties of styrenic copolymer/silica nanocomposites ahmad moaddab, mohamadreza kalaee Paper Accepted (Poster Presentation)
89 2150-UFGNSM13-FULL (R1) Microstructural characterization of nanostructured Al-Zn-Mg-Cu alloy during mechanical alloying and subsequent annealing mohammad amin shafei, jamal hosseinipor, mohammad rajabi Paper Accepted (Poster Presentation)
90 2543-UFGNSM13-FULL (R2) Modification of Nano clay systems: An approach to stabilizing drilling fluids ramin taghdimi, ghola mreza karimi Paper Accepted (Poster Presentation)
91 2457-UFGNSM13-FULL (R1) Modified Synthesis Temperature of Ba3 Co1.7 Ni0.1 Cu0.1 Mn0.1 Fe24 O41 Z-type Ferrite nanoparticles prepared by Co-precipitation Method Ali Ghasemi, Gholam reza gordani Paper Accepted (Poster Presentation)
92 2552-UFGNSM13-FULL Molecular dynamic simulation of the grain boundary energy Abdolvahid ‎ Movahedi-Rad, Reza Alizadeh baloochi Paper Accepted (Poster Presentation)
93 2368-UFGNSM13-FULL Molecular Structure and Vibrational Spectra Simulation of Macro-‎porous Lithium Metal Oxide Materials Paper Accepted (Poster Presentation)
94 2494-UFGNSM13-FULL (R1) Nano hydroxyapatite as a corrosion resistant coating of AZ31 magnesium alloys Mohsen Saremi Paper Accepted (Oral Presentation)
95 2550-UFGNSM13-FULL Nanoscale Simulation of Nanoparticle Phase Stability حسنعلی اله یاری Paper Accepted (Poster Presentation)
96 2527-UFGNSM13-FULL Nanosecond pulsed laser heating of colloidal copper nanoparticles in water Samaneh Malek, Reza Poursalehi Paper Accepted (Poster Presentation)
97 2553-UFGNSM13-FULL Nanostructured Clay Swelling Study in Oil Drilling Wells Arash Khosravi, Hassanali Allahyari Paper Accepted (Poster Presentation)
98 2038-UFGNSM13-FULL Novel full-Interpenetrating Polymer Network Hydrogel with High Mechanical Strength using Graphene Oxide Malihe Kheirabadi, Reza Bagheri, Kourosh Kabiri, Ali Pourjavadi, Effat Jokar Paper Accepted (Poster Presentation)
99 2078-UFGNSM13-FULL (R1) Numerical Modeling of Functionally Graded Coatings Maryam Heidari, Maria Kashtalyan Paper Accepted (Oral Presentation)
100 2506-UFGNSM13-FULL (R1) On the Vibrational Behavior of Piezoelectric Nano-beams Paper Accepted (Poster Presentation)
101 2048-UFGNSM13-FULL Operation improvement and 3D simulation of electric charactristics, ‎and small signal effects of singel-wall and double-wall CNT-FET hadi shahnazari sani, Mohammad Jozi Najafabadi Paper Accepted (Poster Presentation)
102 2285-UFGNSM13-FULL Optical properties of synthesized Fe3O4 nanoparticles doped in nematic liquid crystal under electric field Paper Accepted (Oral Presentation)
103 2529-UFGNSM13-FULL Optimization of the synthesis conditions of CeO2-MgO nanopowder ‎prepared by co-precipitation method fateme ghafuri najafabadi, Rasoul Sarraf-Mamoory Paper Accepted (Poster Presentation)
104 2244-UFGNSM13-FULL (R1) Optimizing Mechanical Properties of a 0.3C-1.5Si-3.5MnQuenched and Partitioned Steel Paper Accepted (Oral Presentation)
105 2464-UFGNSM13-FULL (R1) PEG decorated glycine capped Mn-Ferrite nanoparticles synthesized by co-precipitation method for biomedical application Hooman Shokrollahi, Gholam Hossein Yousefi Paper Accepted (Poster Presentation)
106 2108-UFGNSM13-FULL (R1) Performance of Iron Oxyhydroxide Nanoparticles in Lead Adsorption: A Comparison Study Safoora Rahimi, rozita m moatari, Laleh Rajabi, Ali Ashraf Derakhshan, Mohammead keyhani Paper Accepted (Poster Presentation)
107 2282-UFGNSM13-FULL (R1) Photocatalytic degradation of Sulfacetamide antibiotic in aqueous solutions using immobilized TiO2 nanoparticles Paper Accepted (Poster Presentation)
108 2463-UFGNSM13-FULL Photoluminescence of red-emitting Eu-doped nanophosphors for biological applications Paper Accepted (Poster Presentation)
109 2525-UFGNSM13-FULL (R1) Polyamide decorated graphene sheet as a potential antimicrobial agent: Synthesis, Characterization elaheh fathali Paper Accepted (Poster Presentation)
110 2173-UFGNSM13-FULL (R1) Preconcentration and determination of lead by solidification of floated organic drop coupled with Nanodrop spectrophotometry nafiseh khatibi, ali mazloomifar Paper Accepted (Poster Presentation)
111 2135-UFGNSM13-FULL Preparation and characterization of PET nonwoven/silica aerogel composite for thermal insulation Zahra Talebi Mazraeh-shahi, Seid Ahmad Mousavi Shoushtari, Ahmad Reza Bahramian, Majid Abdouss Paper Accepted (Poster Presentation)
112 2136-UFGNSM13-FULL (R1) Preparation and charactirzation of alumina/3YSZ nanocomposite doped with alumina-coated multi-wall carbon nanotubes omid Sam Daliri, mojtaba ghatee, Seyed Hadi Ghaderi Paper Accepted (Poster Presentation)
113 2534-UFGNSM13-FULL Preparation and identification of SiO2 nanostructure via a modified sol-‎gel approach Elham Noori Paper Accepted (Poster Presentation)
114 2452-UFGNSM13-FULL Preparation and magnetic properties of Co2-W Strontium Hexaferrite doped with Zn , Mn and Ca by co-precipitation Mohammadreza salehzadeh, Ali Ghasemi, Gholam reza gordani Paper Accepted (Poster Presentation)
115 2445-UFGNSM13-FULL (R1) Preparation of cellulose nanofibrils by high-pressure homogenizer and Zein composite films Alireza shakeri, satar radmanesh Paper Accepted (Poster Presentation)
116 2036-UFGNSM13-FULL Preparation of nano crystalline titanium dioxide by microwave hydrothermal method Vahid Moghimifar, Ahmadreza raisia, Abdolreza Aroujalian, Niloofar Bayani Bandpey Paper Accepted (Poster Presentation)
117 2291-UFGNSM13-FULL (R1) Preparation of nylon 6-nanoclay nanocomposites via in-situ polymerization and study their properties Paper Accepted (Poster Presentation)
118 2381-UFGNSM13-FULL Preparation of reduced graphene oxide/cobalt oxide nanocomposites as supercapacitor electrode Paper Accepted (Oral Presentation)
119 2050-UFGNSM13-FULL Presentation of double level FINFET structure with triple metal gate ‎work function for drain barrier reduction and improvement of sub-‎threshold operation in high temperature hadi shahnazari sani, Mohammad Jozi Najafabadi Paper Accepted (Poster Presentation)
120 2208-UFGNSM13-FULL (R1) Processing of Al/SiC/TiB2 hybrid nanostructured composites by underwater shock wave consolidation Paper Accepted (Oral Presentation)
121 2497-UFGNSM13-FULL (R1) Processing of pure copper through ECAP and subsequent cold-rolling fatemeh bakhshandeh, kamran dehghani Paper Accepted (Poster Presentation)
122 2503-UFGNSM13-FULL (R1) Production and wear assessment of Ti/SiC nano-composite surface layers with various SiC contents using friction stir processing Seyed Farshid Kashani-Bozorg, Abbas Zarei Hanzaki Paper Accepted (Poster Presentation)
123 2320-UFGNSM13-FULL (R1) Production of nanostructured Ni-Ti-Ag alloy by mechanical alloying Gh.Ali Bagheri Paper Accepted (Poster Presentation)
124 2407-UFGNSM13-FULL Production of TiFe nanocrystalline intermetallic compound by means of high-energy ball milling process Seyed Farshid Kashani-Bozorg Paper Accepted (Poster Presentation)
125 2283-UFGNSM13-FULL Removal of Co(II) from an aqueous solution by MnFe2O4 bentonite ‎nano composite as a novel magnetic material Paper Accepted (Poster Presentation)
126 2343-UFGNSM13-FULL (R1) Sintering Characterizations Of Ag-nano Film on Silicon Substrate Paper Accepted (Poster Presentation)
127 2372-UFGNSM13-FULL Solvothermal synthesis of CuInSe2 nanostructured powders: comparing open-air with applying internal imposed pressure Paper Accepted (Poster Presentation)
128 2398-UFGNSM13-FULL (R2) Structural and magnetic properties of W-type hexagonal ferrite nanoparticles prepared by Co-precipitation method Marzieh Mohseni, Ali Ghasemi, Gholam reza gordani Paper Accepted (Poster Presentation)
129 2037-UFGNSM13-FULL (R1) Structural changes in poly (lactic acid)/hydroxyapatite nanocomposites by gamma irradiation Susan Dadbin Paper Accepted (Poster Presentation)
130 2544-UFGNSM13-FULL (R1) Structure and Soft Magnetic Properties of a New Nanocrystalline Soft Magnetic FeSiBCuAl Alloy with High Bs of 1.8 T Masoud Mousanataj, farzad shahri, Reza Gholamipour, Behdad Garmeh Paper Accepted (Poster Presentation)
131 2274-UFGNSM13-FULL (R1) Study on Crosslink net-work and mechanical properties of (Ethylene–Propylene-diene Monomer/Styrene Butadiene Rubber/Organoclay) Nanocomposite vulcanized by gamma Radiation Paper Accepted (Poster Presentation)
132 2477-UFGNSM13-FULL (R1) Study the buckling of nanowires based on a size dependent theory Paper Accepted (Poster Presentation)
133 2155-UFGNSM13-FULL (R1) Successive Synthesis of WO3/Pd Core-Shell Nanoparticles by Laser Ablation in Liquid Hossein Kalhori, Mehdi Ranjbar, seyyed mohammad mahdavi Paper Accepted (Poster Presentation)
134 2548-UFGNSM13-FULL Superplasticity of a fine–grained Mg–9Gd–4Y–0.4Zr alloy assessed using shear punch testing Reza Alizadeh baloochi, Terence G. Langdon Paper Accepted (Oral Presentation)
135 2345-UFGNSM13-FULL Synthesis and Characterization of Titanium Oxide Ion-Sieve for Lithium Recovery from Seawater Paper Accepted (Poster Presentation)
136 2304-UFGNSM13-FULL (R1) Synthesis and modification of SAPO-34 nanoparticles by incorporation of metal ions using rapid high temperature method Shadi Jalili Paper Accepted (Poster Presentation)
137 2454-UFGNSM13-FULL (R1) Synthesis of biodegradable Ag- deposited magnetic nanocomposites: a solid phase catalyst with high performance in the reduction of 4-nitrophenol Paper Accepted (Poster Presentation)
138 2341-UFGNSM13-FULL Synthesis of Cobalt Nanoparticles: Comparative Evaluation of ‎Different Precursors Paper Accepted (Poster Presentation)
139 2362-UFGNSM13-FULL (R1) Synthesis of Copper oxide nanophotocatalyst by ultrasonic and improve it’s photocatalical properties and applications in degradation of organic dyes Paper Accepted (Poster Presentation)
140 2521-UFGNSM13-FULL Synthesis Of Gold Nano Pigment Shirin Saket, Sousan Rasouli, Amir Masoud Arabi, Mohammad Ali Faghihi sani Paper Accepted (Poster Presentation)
141 2093-UFGNSM13-FULL Synthesis of magnetic nanocomposite Fe_3 O_4 coated polypyrrole (PPy) for Chromium(VI) removal najmeh sadat mirrezaie, Manouchehr Nikazar, mehrdad hassan zadeh Paper Accepted (Poster Presentation)
142 2043-UFGNSM13-FULL (R1) Synthesis of nano-structured bismuth ferrite by mechano-thermal route Mostafa Ahmadzadeh, abolghasem ataie, Ebrahim Mostafavi Paper Accepted (Poster Presentation)
143 2289-UFGNSM13-FULL (R1) Synthesis of nano structured membrane from carbon nano tube for waste water treatment Paper Accepted (Poster Presentation)
144 2325-UFGNSM13-FULL (R1) Synthesis of nanostructured zinc oxide thin films by anodic oxidation method Paper Accepted (Poster Presentation)
145 2537-UFGNSM13-FULL (R1) Synthesis of nickel/Ba-hexaferrite magnetic nano-composite via mechanical alloying route Issa Sobhani, Abolghasem Ataie, Mahdiye Ijavi, Zoya Sadighi Paper Accepted (Poster Presentation)
146 2432-UFGNSM13-FULL (R1) Synthesis of Polyoxadiazole and Dissolution of MWCNTs by Using Polyoxadiazole masoumeh saremi Paper Accepted (Poster Presentation)
147 2417-UFGNSM13-FULL Synthesis of TiO2 nanotube arrays at different voltages and ‎temperatures in organic electrolyte Farzad Nasirpouri Paper Accepted (Poster Presentation)
148 2459-UFGNSM13-FULL (R1) Synthesize and Modification of Spherical MCM-41 Nanoporous Silica Milad Laghaei, morteza sadeghi Paper Accepted (Poster Presentation)
149 2091-UFGNSM13-FULL (R1) Taguchi Experimental Design for sol-gel combustion synthesis of Al2O3.Y2O3 nano powder yasaman ghaffari, Rasoul Sarraf-Mamoory, nastaran riahi-noori Paper Accepted (Poster Presentation)
150 2307-UFGNSM13-FULL The effect of heat treatment on phase changes in ball milled nano-‎crystalline catalyst powder of 38%TiO2-36%NiO-%26C‎ Paper Accepted (Poster Presentation)
151 2539-UFGNSM13-FULL The effect of heat treatment temperature on the Phase formation and ‎microstructure of Sr2Co2-xMgx/2Nix/2Fe12O22 (Co2Y) hexaferrite prepared ‎by sol–gel auto-combustion method yousef alizad farzin, Omid Mirzaee, Ali Ghasemi Paper Accepted (Poster Presentation)
152 2073-UFGNSM13-FULL The effect of La and Er co-doping on structural, microstructural and magnetic properties of bismuth ferrite nanopowders maryam mohsseni, davood Sanavi Khoshnoud Paper Accepted (Poster Presentation)
153 2496-UFGNSM13-FULL (R1) The effect of post-rolling on the mechanical properties of ECAPed copper kamran dehghani Paper Accepted (Poster Presentation)
154 2081-UFGNSM13-FULL (R1) The effect of process parameters on pulsed Nd:YAG laser welding of Inconel 625 Hadi Ramezani, Seyed Ali Asghar Akbari Mousavi, Hossain Ebrahimzadeh Paper Accepted (Poster Presentation)
155 2402-UFGNSM13-FULL (R2) The effect of quenching rate on structure and soft magnetic properties of high Bs Fe-based nanocrystalline alloys farzad hosseini nasab Paper Accepted (Poster Presentation)
156 2198-UFGNSM13-FULL The effect of ultrasound wave on levothyroxine release from chitosan nanoparticles mehran askari Paper Accepted (Poster Presentation)
157 2438-UFGNSM13-FULL (R1) The Influence of glass fiber (GF) on mechanical and thermal behaviors of epoxy/clay nanocomposites Mohammad Amin Kiani, Ali Chamkalani Paper Accepted (Oral Presentation)
158 2305-UFGNSM13-FULL (R1) The Influence of Nanoparticles on Mass Transfer Coefficient in a Pulsed Sieve-Plate Extraction Column Farnaz Farnian Paper Accepted (Poster Presentation)
159 2501-UFGNSM13-FULL (R1) The investigation of spectroscopic properties of the random media based on R6G with TiO2 and ZnO nanoparticles Paper Accepted (Poster Presentation)
160 2439-UFGNSM13-FULL (R1) The photo-physical and morphological properties of PVP-capped ZnS quantum dots synthesized via aqueous method Paper Accepted (Poster Presentation)
161 2314-UFGNSM13-FULL Thermal properties of MWCNT Polymeric Nanocomposite Paper Accepted (Poster Presentation)
162 2419-UFGNSM13-FULL Thermal stability and mechanical properties of epoxy/ organo ‎modified montmorillonite nanocomposites in exposure of electron ‎beam Mohammad Amin Kiani Paper Accepted (Poster Presentation)
163 2176-UFGNSM13-FULL (R1) The Synthesis of Methylene Blue Photosensitiser Conjugated with Gold Nanoparticles Hasan Kariminezhad, Sona Khayat Omrani, Setareh Habibzadeh, Maria Agheb Paper Accepted (Poster Presentation)
164 2071-UFGNSM13-FULL (R1) Titanium dioxide thin film fabricated by Atomic Layer Deposition (ALD) Hamed Mehrabi, Sohrab Sanjabi Paper Accepted (Poster Presentation)
165 2374-UFGNSM13-FULL (R1) Water Soluble formulations of Ibuprofen by Nano- and micro-particulate Formation Using ESD Technique Paper Accepted (Poster Presentation)
166 2396-UFGNSM13-FULL (R1) Why and how the zigzag edge of suspended graphene sheet where deformed Farhang Sohilian Paper Accepted (Poster Presentation)